WPC Tile Flooring Production Line is composed of extruder, mould, foaming board setting machine, natural cooling system, tractor, new generation of finishing automatic fixed length cutting machine (variable frequency speed control), automatic finished product unloading platform and turnover transportation trolley.

Process flow of WPC Tile Flooring Production Line

1. WPC Flooring Production Line Raw materials

Prepare raw materials, PVC resin, wood powder, straw, light calcium carbonate and other chemical additives.

2. Mixing

(1) According to the formula requirements, manual operation is used to measure the formula ratio, and the measurement is accurate.

(2) After the measurement, start the high-speed mixer, put all the measured raw materials into the high-speed mixer, and mix for about 15 minutes.

3. Feeding (equipment: feeder)

The evenly mixed material is put into the hopper of the extruder through the screw automatic feeder.

4. Extrusion plasticization (using equipment: twin screw extruder)

The extruder is pre-set and kept at about 170 ℃. The material put into the hopper of the extruder is melted and plasticized through the extruder and extruded into the vacuum setting device through the die head.

5. Cooling setting (using equipment: vacuum setting parts)

The material extruded by the die head of the extruder is sent to the vacuum setting device and cooled by circulating cooling water.

6. Traction (using equipment: Tractor)

The cooled and shaped wood plastic board is pulled out by the tractor and sent to the cutting machine.

7. Cutting (using equipment: cutting machine)

The wood plastic board sent to the cutting machine is cut to the required length, and the cut wood plastic board is neatly placed on the tray, with the height of no more than 1m.

Spread the love

Leave a Message

If you have any questions, please leave us a message and we will reply to you as soon as possible