SPC Flooring extrusion line
SPC Flooring extrusion line

SPC Flooring extrusion line

The main materials used in the production of base materials by extruder include: calcium powder, PVC resin,Carbon black, stabilizer, plasticizer, etc.

SPC Flooring extrusion line process mainly includes six links.

1. The main materials used in the production of base materials by extruder include: calcium powder, PVC resin,

Carbon black, stabilizer, plasticizer, etc.

2. The PVC color film, PVC wear-resistant layer and PVC bottom film are rolled into a four roll calender

One time pressing and laminating. This procedure is completely completed by heat, does not contain glue, so does not contain formaldehyde, benzene and other harmful substances.

3. The wear-resistant layer is added on the surface of the board to increase the wear resistance of the floor

Scratch proof.

4. Cut the large board into small boards that meet the specifications.

5. Through the longitudinal and transverse slotting equipment, the edge continuous forming treatment is carried out around the plate.

6. According to the requirements of automatic and semi-automatic packaging.

In the SPC Flooring line process, through the use of modern equipment, slotting equipment, dust removal equipment, etc., the waste can be recycled, and the use of clean energy for combustion can reduce the consumption and waste of raw materials, which really reflects the fashion theme of green environmental protection. This is also the tenet and goal of our company.

Leave a Message

If you have any questions, please leave us a message and we will reply to you as soon as possible