How to distinguish the advantages and disadvantages of SPC flooring?


SPC flooring is a widely used new type of floor decoration material. SPC flooring has been widely welcomed in the European, American, and Asia Pacific markets. In recent years, SPC flooring has been favored by real estate developers and other customers in public and commercial places such as hotels, shops, and kindergartens in China. The home decoration and civilian fields have gradually been accepted by the public due to their superior performance!

But with the rapid popularization of SPC flooring in China, the quality of SPC flooring in the market is uneven, and there is a mix of good and bad. Consumers are dazzled by numerous flooring brands, and how to select high-quality flooring from among them is a challenge facing them.

Jiahao machinery is  one-stop flooring line suppliers, specializing in SPC flooring line,LVT floor production line,wpc floor line for the past 20 years. Please contact us immediately to obtain excellent service and quality.

Today, let’s take a look at the pit avoidance guide for SPC flooring with Jiahao, so that you can choose high-quality SPC flooring.

Steps to identify SPC stone plastic flooring:

spc floor

1. Look at the color

The main focus is on the color of the “SPC substrate”. The pure material is beige, the mixture is gray, cyan, and white, and the recycled material is grayish black and black. The cost can be divided into many levels.

2. Tactile sensation

The SPC substrate has a delicate and moisturizing feel. The hand feel of recycled materials and mixtures is dry, without water and moisture. Check if the smoothness and fit of the two splices are good.

3. Smell the odor

This only has a slight odor when there are some extremely poor ones, and most of the ones containing recycled materials and mixtures can still achieve no odor.

4. Illumination (transparency)

The mobile phone flashlight is placed against the floor for illumination, with good transparency, while additives and recycled materials are not transparent. Or poor transparency.

5. Measure thickness

If conditions permit, it is best to use a caliper or micrometer to measure the thickness of the floor. If the actual thickness is about 0.2mm more than the marked thickness, it is a normal range. For example, if a legitimate manufacturer marks a thickness of 4.0 according to production standards, using a caliper or micrometer to measure should be around 4.2. This is because adding the thickness of the wear-resistant layer and UV layer, and the measured thickness is 4.0, you actually buy a thickness of 3.7-3.8, which is commonly known as cutting corners. We can imagine to what extent this manufacturer can achieve other aspects that we cannot see.

6. Break the lock catch

The part of the floor edge buckle (i.e. the part where the buckle leaks out too much), if you forcefully break the buckle, the poor quality will not break with a lot of force, and the pure new material will have a much greater force, making it difficult to break.

7. Tear off colored film

This is not easy to operate. It is necessary to collect a few samples from merchants, conduct damage sorting on the corners, tear apart the color film layer and the spc substrate, and check the bonding strength between the color film layer and the substrate. This will determine whether it is easy to peel in the future years of use. The bonding strength of pure new materials is the highest, followed by others. If it is not possible to operate it, it is not a problem. Based on the above steps, the indicator of high-quality merchant products will not be poor.

Spread the love

Leave a Message

If you have any questions, please leave us a message and we will reply to you as soon as possible